JW-POE01

Product Description

Double twisted cable test: Turn on the power. (S is a slow automatic class, an M is a manual class.) Place the cables in the maintester and remotetester.

Main tester lights will be switched on sequentially from 1 to G.Main

tester: 1-2-3-4-5-6-7-8-G

Remote tester: 1-2-3-4-5-6-7-8-G RJ45

1-2-3-4-5-6 RJ11

Below are anomalous connections:

If one cable, such as cable #3, is open, the two lights of the main tseter and remote tester will not turn on.

If multiple cables are not connected, multiple bulbs will not turn on accordingly. If fewer than two cables are connected, neither cable is turned on.

If the two ends of the cable are disconnected, for example, no. 2 and No. 4, then displayed:

Main Tester: 1-2-3-4-5-6-7-8-G

Remote Tester: 1-4-3-2-5-6-7-8-G

If the two cables are short, none of the corresponding lights are included in the remote tester, while the main tester remains unchanged. Ifthree cables, including three, are short, none of the corresponding cables are included.

If the test panels are patch panels or wall plates, two cables that can match each other (RJ45) will be connected to the tester.

If the test cables are the same axes, the BNC turns on when the cable is running.

Product Features

This tester uses a rechargeable 9V battery. 

The battery is recommended to be changed if there is any weak oppears luminaire. (Battery is not included.)

Package size: 185*113*34 mm

Package Weight: 100g